Power Requirements: 100-277VAC, 50/60 Hz
Line Feeds (Circuits): 1 or 2
Power Consumption: 4W
Supported Load Types: Incandescent, Halogen, Electronic Low Voltage Transformers (ELV),Magnetic (Iron Core) Low Voltage Transformers (MLV), Fluorescents, Compact Fluorescents, LEDs, Motors
Control Communcations: Ethernet
Module Load Ratings in Contro4® Panel
Module Max with Two Line-Ins: 120V 3200W, 240V 6000W, 277V 6000W.
Line-In 1 Max: 120V 1920W, 240V 3840W, 277V 3840W.
Line-in 2 Max: 120V 1920W, 240V 3840W, 277V 3840W.
Module Max with One Line-In: 120V 1920W, 240V 3840W, 277V 4400W.
Module Load Ratings in Standard DIN Rail Panel
Module Max with Two Line-Ins: 120V 1920W, 240V 3840W, 277V N/A.
Line-In 1 Max: 120V 1000W, 240V 2000W, 277V N/A.
Line-in 2 Max: 120V 1000W, 240V 2000W, 277V N/A.
Module Max with One Line-In: 120V 1920W, 240V 3840W, 277V N/A.
Individual Channel Load Ratings
Incandescent, tungsten, halogen: Max dimmable (120v 1000W, 240V 2000W, 277V 2300W); Min (120v 2W, 240V 2W, 277V 2W).
ELV, MLV: Max dimmable (120v 1000W, 240V 1000W, 277V 1000W); Max non-dimmable (120V 500W, 240V 500W, 277V 500W); Min (120v 18W, 240V 18W, 277V 18W).
Fluorescent, CFL: Max dimmable (120v 500W, 240V 500W, 277V 500W); Max non-dimmable (120V 250W, 240V 250W, 277V 250W); Min (120v 2W, 240V 2W, 277V 2W).
LED: Max dimmable (120v 200W, 240V 200W, 277V 200W); Max non-dimmable (120V 200W, 240V 200W, 277V 200W); Min (except MLV) (120v 2W, 240V 2W, 277V 2W); Min (with MLV trans.) (120v 18W*, 240V 18W*, 277V 18W*).
Motor: Max dimmable (120v N/A, 240V N/A, 277V N/A); Max non-dimmable (120v 1/8 HP, 240V 1/8 HP, 277V 1/8 HP); Min (120v N/A, 240V N/A, 277V N/A).
Line voltage screw terminals: 16 (Line 1, Line 1 Neutral, Earth Ground, Line 1 Out, Line 2 Neutral, Line 2, Loads 1-8, Aux In, Aux Out)
Recommended wiring size: One 26 AWG to 12 AWG (0.12 mm2 to 2.5 mm2) per terminal
RJ-45: 2 ports—1 Ethernet in, 1 Ethernet passthrough
Operational temperature: 32˚F to 104˚F (0˚C ~ 40˚C)
Humidity: 5% to 95% Non-condensing
Storage: -4˚F to 158˚F (-20˚C ~ 70˚C)
Heat dissipation: 175 BTU/hr @120VAC
NOTE: *Important! When dimming MLV loads, each transformer must be loaded to at least 50% of its maximum load.

	CTR-DIN-8APD-E
	CTR-DIN-8APD-E - Data Sheet
	CTR-DIN-8APD-E - Installation Guide
	CTR-DIN-8APD-E - Wiring Guide
	CTR-DIN-8APD-E - Operation and Configuration Guide